One/Two-Directional Thrust Ball Bearing THRUST BALL BEARING, FROM DIA 10MM - 100 MM. 51100--51120, 51200--51220, 51305--51320, 51405--51420. (1). Flat-race thrust bearings: Consist of a pair of flat washers separated by the ball complement and a shaft-piloted retainer, so load capacity is limited. Contact stresses are high and torque resistance is low. The prime advantage of flat-race thrust bearings is they permit eccentricities,

SKF Steel Single Direction Thrust Ball Bearings Single direction thrust ball bearings SKF single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately. Smaller sizes are available with either a flat seat surface on the housing washer or a sphered seat surface.

Specifications:thrust ball bearing 1)ID Size:100mm-800mm 2)Material:GCr15,GCr15SIMn 3)Quality Stander:ISO9001:2008 Par excellence single row thrust ball bearing 51200:1 Certificates: ISO9001:2008 ect. 2 Material: GCr15 GCr15 Simn  3 Bore Size: 100mm-800mm or according to your order. 4 Stock: Available 5 Export Area: US,UK,Philippine,Japen…6 Delivery Time: 30-40 days or according to your order.
7 Physical  Characteristics:

1.low pice and high quality 2 excellent service Single direction thrust ball bearings Bearings with a sphered housing washer can be used together with a sphered seat washer to compensate for misalignment between the support surface in the housing and the shaft Sphered seat washers are available from NSK but must be ordered separately Can accommodate axial loads in one direction and thus locate a shaft axially in one direction Must not be subjected to any radial load

The six types of ball bearings: 1. Three point contact ball bearing Single row angular contact ball bearings when subject to pure radial loads, each load of the ball by two contacts with a channel, but with little contact with the other channel. Under pure axial load, each ball with only one contact with each channel. Two. Locking counterbored ball bearing ball bearings Outer ring of a rib removed all or part of the groove-type ball bearings.

Install thrust bearing, they should test shaft ring and shaft centerline perpendicularity. Method is to dial gauge fixed on the tank shell face, so touch the table top of the head ring in the bearing raceway upper rotating shaft bearings, side observation dial gauge pointer, if the pointer yaw show ring and shaft axis is not perpendicular to the centerline.

Thrust Ball Bearings This type of bearings is separable, which can only carry axial load. The single direction bearings of them can only carry axial load in one direction, while the double can carry alternating axial load in either direction. Before using they have to be preloaded. The thrust ball bearings are used in lathe centers, automobile clutches, reducers and so on. The double direction angular contact thrust ball bearings are suitable for machine tool spindles,

Thrust ball bearings, thrust ball bearings at the one-way and two-way thrust ball bearings, bearings, can take a one-way direction of the axial load, the bearings can withstand two two-way direction of axial loads, both can not afford a radial load. Thrust ball bearings to be at work in the axial top tight, bearing mainly applicable to such vehicle steering mechanism,