Self-Aligning Radial Spherical Plain Bearing GE10E (Stainless Steel Rod End)  1. Stand load of radial, axial 2. Self-aligning 3. Lubricant Type Material: Rod end of steel and zinc coated, with male or female thread,spherial surface with bronze liner,inner ring of carbon chromium steel,spherical surface with chromium plating,can be lubricated via a nipple or a hole in the rod end. It has characteristics of large load capability,easy mounting and dismounting and mechanism simplification.

SKF self-lubricated rod end bearing GE10E 1.Male female rod end bearing 2.Low noise lubricated bearing 3.SKF lubricated rod end bearing SKF GE series ITEM NO.: GE series  can bear radial load, axial load or radial, axial and existing joint load. Rod End are generally used to speed the lower swing motion (namely Angle motion), with the sliding surface, also can be for spherical shape within the scope of certain Angle for tilt movement (i.e. self-aligning movement),

Stainless steel/carbon combination rod ends with male thread rod end with male thread consists of a housing insert ring and ball available in right or left hand thread male or female Rod Ends are compact self-aligning spherical bushings that can support a large radial load and a bi-directional axoal load at the same time. These bushings are classified by sliding surface types,namely,insert type,die-cast type and maintenance-free type.In the insert type

High Precision Aluminum Rod Heim POS,SA..T/K,XM Rod end bearing. Nylon as race.PTFE liner as race.Brass as race. Aluminum rod body.Stainless steel rod body. Ball joint rods. Aluminum Rod heim. 1.Rod end bearings are used on the ends of cylinders,linkages,rods and shafts.To take up angular misalignment between connected parts.They attach to rods and shafts via a male stud with external threads,or a female housing with internal threads.