Flanged oilless sliding bearings & bushings Flanged oilless sliding bearings & bushings may be used where no oil can be applied or oil is difficult to be applied. It has the advantage of low wear, low friction and with long life. Load will spread over a wider area due to the bearing materials elastic nature. Low stick slip properties ensuring accuracy of machine operation under low sliding speeds. Low vibration, low noise and non-pollution in operation.

Self-lubricating stainless steel bushing (sliding bearing) SF-1S Stainless steel bushing 1.stainless steel back,sintered bronze,PTFE layer 2.oilless,self-lubricating 3.low wear,low friction Stainless steel bushing introduction: 1、Stainless steel bushing has a common structure, consisting of a stainless steel backing bonded to a porous bronze sinter layer with filled PTFE on its surface. 2、The color of Stainless steel bushing's inner layer is black. Stainless steel bushing

Self-lubricating bronze oilless bushing SF-2 (wrapped sliding bearing) bronze bushing 1.SF-2 boundary lubrication bearing 2.Minimum coefficient of friction 3.Passed ISO 9001 and TS 16949 Advantages at a glance 1.Minimum coefficientof friction for solid materials 2. Maintenance free and self-lubricating 3.Minimum stick-slip effect 4.High pU (PV) for absolute dry-running and stability 5.Takes up edge loading and compensates for misalignment 6.Eliminates noise

Wrapped Multi-layered Dry Sliding Bronze Bearing Bushing Wrapped Bronze Bushing Offered by Sinfine Factory in China, manufacturer of bronze bushing, JDB bushing, wrapped bushing * Size available in Metric and Inch * Punchings and moldings are produced on customer requirement * Cylindrical and flanged bushings, thrust washer, strips are standard fabrication * All special designs are produced at short notice * Also available lead free * Maintenance-free dry sliding bearing *

SF-1X(DU) Self-lubricating sliding bearing (Bushing) Metric and inch series SF-1X(DU): Steel DC01 + Sintered bronze ball(CuSn8Zn3) + 1X PTFE filler with Pb. 1X PTFE filler is the pre-embedded lubricant SF-1X(DU): Steel DC01(ST12) + Sintered bronze ball(CuSn8Zn3, 0.25~0.35mm) + 1X PTFE filler with Pb. 1X PTFE filler is the pre-embedded lubricant, so it could be used where the oil is hard to be added. It is maintenance free and has long service life. Performance:

Sintered bronze flange oilless bushing FU 152412 1.Heat resistance 2.Anti-corrosion 3.Sizes can be customized 1. high strength cast bronze based material 2. surface is embedded with solid lubricant 3.There are many kinds of sliding bearing in our company with high quality and competitive price. 4.sizes can be produced as customer's request 5.slide easily and self-lubricating Applications:Widely used in the casting machines, steel rollers in metallography, mineral machines