Roller Bearing with the hollow shaft assembly

Follow the method of Roller Bearing Mill, in the hollow shaft and the Roller Bearing installation form more unreasonable to use the factory mill operation in the future work to bring some disadvantages. To solve this problem, we offer you the mill the best hollow shaft Roller Bearing assembly installation method.
    
    Industrial use of fine grinding mill with Roller Bearings have been widely in China to promote and save the power consumption, increase productivity, save oil, reduce the amount of maintenance, reduce pollution and other aspects, has received good results.

Mill hollow shaft bearing installed old-fashioned method is processed into hollow shaft diameter for the Roller Bearing, the bearing thermal devices, bearing area, bearing the outer ring has the top cover, top cover out of material by spiral tube (or out of contrast material sets) bolted to the hollow shaft to compress. In the grinding operation process, the spiral cylinder and out of materials, fixed bolts often loosen, causing the top cover and the hollow shaft generate displacement, dust will cover the hollow shaft and the gap between the top enter the bearing box, so that grease is dirty, lead to poor lubrication, causing bearing damage phenomena occur.

In order to overcome some of these shortcomings, we went through years of practice and exploration, design a new installation method, and use the factory has been in some good application.

The method is: hollow shaft in the mill will be installed on the site bearing the diameter of the hollow shaft is cooled hollow shaft of light oil in turn transmitted to the bearing on the temperature to 60 degrees below the normal range.

The advantages of this bearing the following:

1. Dilute oil lubrication is better than grease lubrication, the bearing to minimize friction coefficient, saving better. (HotTag)

2. Bearing the temperature of the normal operation of the dry oil lubricating the bearing temperature is much lower, extending bearing life.

3. Bearing Xiazuo observed with the oil level oil standard, operators can always see the oil level is high or low, add oil in time to prevent adverse lacking fuel and lubrication, to avoid the occurrence of bearing damage.

4. Bearing oil content of the oil chamber can be installed on the outer diameter of Roller Bearing narrow (in and out equipment installation to ensure adequate strength and torque strength of the premise), hollow spiral tube axis and the out feed end located a flange connection, and access to material for spiral tube flange connection. Changes in the hollow shaft by the rough surface of thin clients, set up a compression ring bearing flange, to prevent the bearing axial sprang.

The second advantage is due to increased Roller Bearing diameter, and the average diameter of the formation of hollow shaft diameter difference, on the use of thin oil lubrication chamber, to improve bit thin oil to reduce the thin oil spill received some results.

The third advantage is outside the top cover to remove the bearing, to prevent dust entering the bearing chamber to maintain a good quality oil to ensure the bearing's service life, safe and reliable operation.

The fourth advantage is that installation of the bearing parts as hollow shaft diameter of the Roller Bearing and out to feed the radial distance between the spiral tube increased, played a certain role in cooling insulation. The cooling of the bearings and prolong life, play a certain use.

We export high quantities Roller Bearing with the hollow shaft assembly and relative products, we have huge stocks for Roller Bearing with the hollow shaft assembly and relative items, we supply high quality Roller Bearing with the hollow shaft assembly with reasonbable price or we produce the bearings along with the technical data or relative drawings, It's priority to us to supply best service to our clients. If you are interested in Roller Bearing with the hollow shaft assembly,plz email us admin@tradebearings.com or send the purchase details to trade b2b website(www.tradebearings.com) so the suppliers will contact you directly
Previous Product:« Carrying the load bearing capacity calculation
Next Product:Three characteristics of spiral bearing »