Features of angular contact ball bearing

Angular contact ball bearing is entad thrust ball bearing, it can loaded many steel balls, so its
radial bearing capacity is greater than the ordinary ball bearings, it can also accept a lot of the axial load, or pure axial which allow working speed similar to deep groove ball bearing ,with deeper rigid, but the precise requirements for the axes of error is very sensitive, it is not generally used to separate withstanding the radial direction load, when withstanding the radial direction load ,it must brought to the additional axial load. These bearings have many variants species, the application is knowledgeable and often made contact angle with 15 degrees, 25 degrees and 40 degrees of three series, the more contact angle, the higher the axial load capacity, but it’s better for small contact angle at high speed.
These bearings mostly used pairing according to span of supporting or a pivot, we must carefully adjusted clearance and change the axial distance of both outside and inside bearing, so you can adjust the internal clearance, it can also parallel install several sets of bearing and be sure of interference, so that it can improve the rigid of the bearing system.
Each this type can only accept a bearing on the direction of the axial load, also need to configure another bearing to counteract the additional axial force, and to install the additional effort is to cancel each other, and can carry the axial load from two directions, and two directions of the axial have very strong limited ability, the installation is generally adopted two sets of bearings to the outer ring is for mitigating the multifaceted (back-to-back) or narrow end of the face to face multifaceted (face-to-face) , therein the back-to-back bearing system has the best rigid.
This type bearing has two forms as separable type and non-separable type, separable type used for the in stallion condition is limited, request the outer or inner ring from the bearings during installation, so that each case, the angular contact ball bearings are separable in the magneto widely used, so also called magneto bearings. This type of its bearings in the lock can be adapted to the higher speed.

We export high quantities Features of angular contact ball bearing and relative products, we have huge stocks for Features of angular contact ball bearing and relative items, we supply high quality Features of angular contact ball bearing with reasonbable price or we produce the bearings along with the technical data or relative drawings, It's priority to us to supply best service to our clients. If you are interested in Features of angular contact ball bearing,plz email us admin@tradebearings.com or send the purchase details to trade b2b website(www.tradebearings.com) so the suppliers will contact you directly
Previous Product:« FAG bearing off the shelf
Next Product:Ball Screw FF(single nut with flange, no preload) »